Skip to content
Spend $300+, save up to $60. Use code SPRING15, 30, 45 or 60.
Spend $300+, save up to $60. Use code SPRING15, 30, 45 or 60.

Official Retailer of the Best Australian Brands - 1000+ of in-stock products

Open oak vanity drawer with an integrated power point and electric shaver beneath a limestone benchtop.

In-Drawer Power Points Australia: Is This Vanity Upgrade Worth It?

A toothbrush charger beside the basin. A shaver lead across the benchtop. A hairdryer that lives in the wrong drawer because the nearest socket is on the other wall. These are small frustrations, but you notice them every morning.

An in-drawer power point can make a vanity easier to use and keep charging clutter out of sight. The useful question is whether it suits your cabinet, your appliances and the way you get ready. Here is how to decide before you order.

Are in-drawer power points worth it?

An in-drawer power point is worth considering when you regularly charge grooming devices and want a clearer vanity top. It needs compatible cabinetry, clearance for plugs and cable movement, and a suitable electrical supply. Plan it before ordering a new vanity; for an existing cabinet, confirm the fit and installation cost first.

In-drawer, mirrored-cabinet or wall power?

Choose the location around what you use. A drawer outlet and a shaving-cabinet outlet solve different storage problems; neither automatically replaces every wall socket.

Quick comparison: three ways to plan vanity power
Location Best suited to Main trade-off Check first
Inside a drawer Devices stored in that drawer; keeping charging leads off the top Uses some drawer space and needs a managed moving cable Drawer construction, plug clearance and full drawer travel
Inside a mirrored cabinet Small grooming devices stored near the mirror Charging bases and plugs compete with shelf space Shelf spacing, door clearance and supply location
On the wall Easy access for appliances used outside the cabinet Plugs and leads remain visible during use Permitted position, reach and your bathroom layout

What is an in-drawer power point?

It is an outlet assembly designed to sit inside a compatible drawer. Some include USB charging ports, so a suitable device can charge without a separate plug-in adaptor. The drawer still needs room for the unit, its connection and whatever you intend to store.

For example, ADP offers white and black drawer units with one USB-A and one USB-C port. A USB socket alone does not guarantee compatibility or a particular charging speed with every device; check the device's requirements against the product specification.

When is the upgrade worth paying for?

You charge the same devices every day

If a shaver and toothbrush charger permanently occupy the vanity top, moving suitable charging equipment into planned storage can free the surface. Measure the charging base with its device attached. The charger that fits comfortably on the counter may be surprisingly tall inside a drawer.

You are already ordering a new vanity

This is a useful time to coordinate the accessory, drawer position and electrical supply. Start with a cabinet that suits the room using our bathroom vanity dimensions guide , then check the power option against that exact model.

Your existing setup already works well

If you rarely charge anything in the bathroom and already have a conveniently positioned wall outlet, the benefit may be modest. Spend on storage or another feature you will use more often. Our Australian vanity brand guide can help you compare the wider cabinet package.

Will an in-drawer power point fit your vanity?

The vanity's overall width will not answer this. A wide cabinet can have shallow drawers, a basin cut-out or plumbing that occupies the most useful space.

Check the inside of the intended drawer, the space behind it and the position of runners, dividers and waste plumbing. Include the depth of a plugged-in adaptor and the space needed for the cable to move throughout the drawer's travel. Ask the cabinet supplier to confirm the proposed accessory and position.

ADP lists its PWRDRW240VWH and PWRDRW240VBK units at a nominal 124mm wide × 53mm high × 38.5mm deep, with a maximum cord length of 750mm. Those are product dimensions, not a universal cabinet cut-out. Use the ADP specification sheet and the actual supplied unit when your installer plans the fit.

Retrofitting may be possible, but it depends on the cabinet and access to a suitable supply. Confirm any required alterations with the manufacturer before modifying cabinetry, including how they affect its warranty.

Electrical planning: ADP and Timberline differ

For the ADP models above, the manufacturer's installation instructions specify a GPO, or general purpose outlet, at the back of the cabinet, installed by an electrician. The drawer unit plugs into that outlet. ADP explicitly says this unit is not designed for hardwiring. Its instructions also prohibit an extension lead.

Timberline's current powerpoint installation guide describes a three-pin plug connection and an alternative hardwired arrangement to discuss with your electrician. Confirm the instructions for the supplied model and your order; connection details should not be transferred between brands.

In NSW, electrical wiring work must be done by a licensed electrician. Have them confirm outlet placement, circuit protection and cable routing for your basin, shower and bath layout. Being inside cabinetry does not, by itself, establish that a location is suitable. Ask for a copy of the electrical compliance certificate where applicable.

Charging storage is not a hot-tool drawer

Do not operate a hairdryer inside a closed drawer or put away hot styling tools before they have cooled according to their instructions. Do not assume the outlet switches off when the drawer closes. Charging with the drawer shut is only appropriate where the appliance and outlet instructions permit that use and the required clearance and ventilation are provided.

How much does an in-drawer power point cost?

At our 2 November 2026 price check, Blue Leaf listed the ADP white and black drawer units at A$84 each and the Timberline drawer option at A$139. The ADP mirrored-cabinet alternative was A$50. These are accessory prices, excluding installation and any delivery charges.

For the installed total, request a quote covering the accessory, cabinet preparation and electrical work. An existing vanity with difficult supply access can be a different job from an option coordinated with a new cabinet. Ask whether your chosen vanity already includes drawer power before paying for an extra.

Two everyday layouts to compare

A new ensuite with shared charging

Imagine two people sharing a vanity, each with a toothbrush charger, plus one electric shaver. Start by placing the actual charging bases and adaptors in the proposed storage area. Allow for the toothbrushes standing upright, access to switches and normal drawer movement. If the arrangement leaves little useful storage, split the devices between a drawer and a mirrored cabinet rather than squeezing everything into one compartment.

Write the preferred position into the vanity order. “Drawer power included” is less useful than knowing which drawer, which accessory and what supply your electrician needs to prepare.

An existing vanity with limited space

Now consider a shallow top drawer shaped around the basin waste. The outlet faceplate might fit, but a bulky adaptor could obstruct storage or the moving cable. Ask for a fit assessment before buying the accessory. A compatible cabinet outlet or an existing wall outlet may be more practical if the drawer cannot accommodate the complete arrangement.

Also separate USB charging needs from mains appliance use. Count the devices and check the unit's combined rating; several sockets do not mean each can supply the full rated load independently. Let your electrician assess the proposed appliances together.

The vanity power planning checklist

Send these details to your cabinet supplier and electrician before you order. It gives everyone the same brief and makes missing information easier to spot.

A practical brief for your vanity supplier and electrician
Record this Include Why it matters
Cabinet Brand, model, drawer layout and photos Accessory compatibility and proposed mounting position
Usable space Internal drawer measurements and space behind it Unit, adaptor and cable clearance
Devices Names, charging bases, plug sizes and power requirements Storage fit and appropriate outlet capacity
Supply Existing outlet position and the selected unit's instructions Electrician's assessment of the connection and placement
Order Finish, preferred drawer, inclusions and installation quote A clear order with fewer assumptions

For a shared ensuite, write down what both people use at the same time. One drawer outlet may solve charging clutter while a separate, appropriately placed wall outlet serves an appliance in use. Your electrician can assess the complete arrangement.

If small chargers fit better beside the mirror, compare shaving cabinets instead. Our guide to recessed and surface-mounted shaving cabinets explains the space and installation differences.

SHOP THE GUIDE

Power Options for a Tidier Vanity

Compare three drawer options and a mirrored-cabinet alternative at Blue Leaf. Match the accessory to your cabinet and electrical plan before ordering.

In-drawer power point FAQs

Can I add a power point to an existing vanity drawer?

Sometimes. The drawer needs suitable construction, mounting space, cable clearance and access to an appropriate supply. Send the cabinet model and photos to Blue Leaf, then have your cabinet supplier and electrician confirm the proposed installation.

Does an in-drawer power point need an electrician?

Electrical wiring work in NSW requires a licensed electrician. A plug-connected accessory still needs a suitable supply and an appropriate installation. For the ADP units in this guide, the manufacturer specifies an electrician-installed GPO inside the cabinet.

Can I keep my hairdryer plugged in?

Follow the hairdryer's instructions for switching off, unplugging and storage. An internal socket does not make a drawer a safe place to operate a hairdryer or store a hot appliance. Allow heated tools to cool as directed before putting them away.

Do these outlets turn off when the drawer closes?

Do not assume so. Check whether that function is explicitly listed for the exact product. A concealed outlet, USB charging port and automatic shut-off are separate features.

Is drawer power better than a shaving-cabinet outlet?

Choose the location where your devices fit and are easiest to access. Drawer power can suit items stored below the basin; cabinet power can suit smaller devices near the mirror. Compare usable storage and plug clearance before deciding.

Will an ADP power point fit another vanity brand?

Compatibility needs confirmation. Cabinet construction, mounting clearances and cable routing vary. Give the cabinet supplier the exact accessory code and specification sheet rather than ordering on overall vanity width alone.

Get the Power Plan Right Before You Order

Send Blue Leaf your vanity model, drawer photos and the devices you want to store. We can help you compare the accessory options and clarify product details before you finalise the installation with your electrician.

Choosing the cabinet too? Explore our bathroom vanities , or contact us to arrange a showroom consultation.

Next article Bidet Spray vs Bidet Seat Australia: Which Should You Buy?

Compare products

{"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}

Select first item to compare

Select second item to compare

Select third item to compare

Compare